Install guideHarbor Freight Angled Rock Light Mount - Prinsu type Racks

Prinsu-style rack mount diagram
Prinsu-style rack mount diagram

Installation

  1. Bolt the light on with the M4 screws.
  2. Drop the mount into the rack slot and run the single 1/4" bolt. No need to take the rack apart.
  3. V3 gives you two wiring options: through the rear slot in the rack, or straight down from the light.
  4. Always use the washers, and don't overtighten the light screws: 2.2 ft-lbs (3 Nm) max. Go past that and you can strip the threads.

In the box

In the box:

  • 1 mount
  • 1 × 1/4" × 1" button head bolt
  • 2 × 1/4" flat washers
  • 1 × 1/4" locknut
  • 2 × M4-0.7 × 15mm flanged screws (for the light)

All hardware is 304 stainless. Light not included.

QR code to the product page

Reorder, leave a review, or see full specs: advtr3d.com/products/harbor-freight-prinsu

Questions? sales@lentdesignworks.com