1
/
of
5
ADVTR3D
Baja Designs Angled Rock Light Mount - Prinsu Type Racks
Baja Designs Angled Rock Light Mount - Prinsu Type Racks
Regular price
$14.50 USD
Regular price
Sale price
$14.50 USD
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
The OG affordable rack light solution.
Ever need that perfect amount of light at camp or when doing trail repairs? This Baja Designs rock light mount is a perfect solution. It allows your light pattern to be aimed where it's needed most with an integrated 30° angle from the edge of the roof rack.
The mount is compatible with both the standard BD rock light as well as the Dome light variants. (2.35" bolt spacing) These mounts utilize the M4 hardware that is included with the BD rock lights (the shorter ones). Rock lights are NOT included.
These mounts feature a easy, single bolt install that requires zero disassembly of the rack. Only compatible with Prinsu style racks with a 1/4" wide slot in the side panels as well as the rear slats & any 1010 aluminum extrusion profiles with the use of separate hardware (not included: 80/20 P/N: 3382 and a shorter 1/4" bolt) For other light/rack combos please visit our shop.
These mounts are sold individually.
The following 304SS hardware is included:
-1X 1/4" X 1" Socket Cap Bolt
-2X 1/4" Flat washers
-1X 1/4" Locknut
The following hardware is NOT included, but is required for install.
-2X M4 Screws (included with Light)
(note: there are other brands of lights that use the 2.35" bolt spacing. These may fit, but other spacers or alternative hardware may be required, for this reason fitment is only guaranteed to fit with the BD series of lights. There are old drawings online that show older gen BD Rock lights with a different spacing, these mounts DO NOT fit prior gen rock lights with narrower spacing)
*Disclaimers* This part is made using additive manufacturing (3D Printing) and will display some of the common attributes like layer lines and minor printing imperfections. These are strictly cosmetic and have no effect on part performance. These mounts feature Heatsert threads, max light mounting Torque is 2.2 ft/lbs. (3nm), exceeding this can cause the threads to strip. Washers must be used for all rack mounting hardware.
Ever need that perfect amount of light at camp or when doing trail repairs? This Baja Designs rock light mount is a perfect solution. It allows your light pattern to be aimed where it's needed most with an integrated 30° angle from the edge of the roof rack.
The mount is compatible with both the standard BD rock light as well as the Dome light variants. (2.35" bolt spacing) These mounts utilize the M4 hardware that is included with the BD rock lights (the shorter ones). Rock lights are NOT included.
These mounts feature a easy, single bolt install that requires zero disassembly of the rack. Only compatible with Prinsu style racks with a 1/4" wide slot in the side panels as well as the rear slats & any 1010 aluminum extrusion profiles with the use of separate hardware (not included: 80/20 P/N: 3382 and a shorter 1/4" bolt) For other light/rack combos please visit our shop.
These mounts are sold individually.
The following 304SS hardware is included:
-1X 1/4" X 1" Socket Cap Bolt
-2X 1/4" Flat washers
-1X 1/4" Locknut
The following hardware is NOT included, but is required for install.
-2X M4 Screws (included with Light)
(note: there are other brands of lights that use the 2.35" bolt spacing. These may fit, but other spacers or alternative hardware may be required, for this reason fitment is only guaranteed to fit with the BD series of lights. There are old drawings online that show older gen BD Rock lights with a different spacing, these mounts DO NOT fit prior gen rock lights with narrower spacing)
*Disclaimers* This part is made using additive manufacturing (3D Printing) and will display some of the common attributes like layer lines and minor printing imperfections. These are strictly cosmetic and have no effect on part performance. These mounts feature Heatsert threads, max light mounting Torque is 2.2 ft/lbs. (3nm), exceeding this can cause the threads to strip. Washers must be used for all rack mounting hardware.
Share
